Banners

Consider using a heavier weight material when your banner will be suspended between poles or buildings
Plan to apply letters to one side of your banner only. Most stocked banner material is guaranteed to be vinyl-receptive on one side. If you choose to put letters on both sides, the non guaranteed side may loose it's letters on that side if the sign is used outdoors. To ensure outdoor durability, letters should only be applied to the proper side.

Grommets - Prevents sagging by distributing the banner's weight evenly
Pole Pockets - By inserting rigid poles into pockets along your banners’ edges the more even weight distribution prevents sagging, making your banner more rigid
Hemmed Edges - Helps your vinyl banner maintain it's shape and prevents stretching
Power Tape - Helps to reinforce the edges of shear-cut banners, or banners that have no material available for hemming
Banner-Ups - Plastic tabs with eyelets on each corner of your banner creates convenient hanging points
D-rings with Nylon Webbing* - Uses D-rings and ratchet straps to secure large banners hanging on buildings
Nylon Webbing* - Helps to reinforce the tops and bottoms of your banners extending their lives, especially if you’re in a high wind area

* Extra time required.

Banner Installation

Grommets are placed in all 4 corners, and every 2-3’ feet across the top and bottom during production. These grommets are used to hang and secure the banner while minimizing stress. corners are two-ply to ensure strength for intermediate to long-term outdoor life
Large banners require special care during installation, please contact us if you are unsure of the best method.

Store your banner by rolling the banner with the graphics or letters on the outside preventing letter separation and air bubbles. Never fold your banner! This will cause it to have creases
Improve the longevity of your banner with proper care and handling